Parts & Accessories

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

Protect your TrunkBag and the gear inside with Topeak's Rain Cover. Easily packable, the Rain Cover fits Topeak's TrunkBag DXP & EXP (sold separately).

These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

Replacement buttons and straps for the Remora Aero Storage. - Rubber straps and buttons to secure the Remora Top Tube Storage container.

Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy. Also great for light mounts, a saddlebag stabilizer, or anything else you problem solving people tend to dream up. Unless you’re thinking about towing a jet ski with it. Let’s be reasonable. Tech Details - Available in 31.8 mm and 34.9 mm diameters - Alloy clamp - Stainless steel bolt - Threaded to accept standard M5 bolts

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

Topeak handlebar bag fixer for eBikes with display units.

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Extend the life of your Dummy bags with this replaceable wear patch.

Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.