$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Help is ready to spring into action when you need it and Ninja CO2+ is the ultimate quick fix! The included Micro AirBooster and 2 threaded 16g CO2 cartridges make fixing flats easy with quick access by a simple twist. Integrated tire levers make the system complete. - Cage Material: Engineering grade plastic - Presta / Schrader Push to inflate - 2 engineering grade plastic levers - Fits standard water bottle - 2 threaded 16g CO2 cartridges Compartment for CO2 inflator & cartridges - Size: 19.3 x 9.6 x 7.8 cm / 7.6” x 3.8” x 3.1” - Weight: 226 g / 7.97 oz
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 16-gram C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
$20.00 - $35.00
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Ingenious design allows the spare tube to be rolled up, while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accommodate all different size mountain tubes
$15.00 - $25.00
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
Planet Bike's Airship CO2 Inflator fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. It also has a rugged composite body, is small enough to easily fit in bags, pockets and packs, and it accepts 12- and 16-gram cartridges. A 12-gram cartridge is included.
You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
$17.99 - $21.99
CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams
$59.99 - $75.00
- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges
- Easy operation right angle threaded co2 tire inflator - Accepts threaded cartridges and big air, includes cartridge - Simple turning motion dispenses gas at a controlled rate - Compact design allows use with disc wheels - Law prohibits ORM-D materials from shipping by air
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! - VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) - STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items - FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. - The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) - The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) - Glass Reinforced Nylon - Chassis weight: 30 grams Includes: - Center Plate - Multi Holder - CO2 Holder - 2 AIR STRIKE CO2 Cartridges - Hardware Popular Clincher Setups (accessory items sold separately) - Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. - 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) - Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. - Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
The Portland Design Works Fatty Object is the first CO2 inflator on the market designed specifically to inflate fat and plus-sized tires. Made of indestructible alloy, the Fatty Object fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. The Fatty Object comes with a 38g threaded CO2 cartridge a lightweight foam insulator sleeve that will fill a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi. - Precision-machined body - Fits Presta and Schrader values - 38g threaded CO2 cartridge which fills a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi - Inflator only height: 44 mm (1.75") - Inflator only weight: 40g (1.3 oz) - Foam insulator sleeve length: 77mm (3") - Weight of inflator with cartridge: 80g (6.9 oz) - Instruction manual (PDF) - Lifetime PDWarranty
Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty
Planet Bike's 12-Gram CO2 Cartridge 3-Packs are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Airship and most other manufacturers' inflators that use unthreaded cartridges.
Planet Bike's 16-gram CO2 Cartridges are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Air Kiss, Red Zeppelin, Airship, and other manufacturers' inflators that use threaded cartridges.
Blast off with Planet Bike's Airship 2.0 CO2 Bike Tire Inflator. It's lightweight, strong and easy to use. Stash it in your bike bag or jersey pocket and away you ride. - Lightweight aluminum design stores cartridge and protects from cold cartridge when in use - Auto head fits both Presta and Schrader valves - Accepts 16g threaded and non-threaded cartridges - Includes one 16g threaded CO2 cartridge - Small size fits in saddle bag or jersey pocket - Length: 130mm - Weight: 123 grams
Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Includes two 16g CO2 cartridges & insulator sleeve - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)
Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)
The Phil Hose offers the speed and convenience of CO2 inflation plus the accuracy of a pressure gauge. The Smooth Regulator valve and inflator hose with a built-in 40-100 psi pressure gauge make inflating your tire a breeze. - Flexible hose with inline gauge makes for quick, easy, and accurate inflation - Precise and easy to read 40-100 psi gauge - Fits Presta and Schrader valves without adaptors - Smooth Regulator valve for precise inflation and safety - Without a cartridge use it as a tire pressure gauge - Compatible with threaded cartridges - Includes a 16g CO2 cartridges & insulator sleeve - Length: 180 mm - Weight: 102 grams
The AirStream Inflator (INF-200) is MSW's ultra-small, minimalist compressed-air inflation device, featuring easy twist-on / twist-off operation and cartridge storage threads. - Composite body with alloy head - Plug to keep the cartridge interface clean - Simple twist on/off operation
MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader. - Compact design for easy storage - Alloy construction for durability and lightweight - Press on for both Schrader and Presta valves - Compatible with all 3/8" threaded compressed air cartridges
Lightweight and easy to use, MSW’s Jetstream adjustable inflator head works with all 3/8" threaded inflation canisters and allows you to vary the CO2 flow to avoid overfilling your tires. - Adjustable airflow with a convenient shut-off feature - Easily pushes onto Presta or threads onto Schrader valve tubes - Knurled knob for reliable grip even with mittens or gloves - Kit comes with two 20g cartridges
Page 1 of 2 Next page