Filter By:
- Accessories/Parts (76)
- Hitch-Mount (31)
- Pickup/RV/Spare-Tire Mount (9)
- Roof-Mount (34)
- Trunk-Mount (7)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Car Racks
$49.00
12 x 100mm fork adapter for use with 9mm fork-mount bike racks.
- 12mm x 100mm
- Axle not included. Works with your bike's thru-axle
- Built-in safety tabs
- Durable black powder-coat finish
- All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts
Product Specs:
- Weight: 0.41 lbs.
- Dimensions: L 4.50 in x W 1.25 in x H 4.00 in
- Limited Lifetime Warranty
$39.00
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
$17.00
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately.
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
Product Specs:
- Weight: 0.20 lbs.
- Dimensions: L 4.00 in x W 3.25 in x H 1.00 in
- Limited Lifetime Warranty
$399.00
Hitch rack swing adapter.
Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Product Details:
- Hitch extension converts most 2" hitch products to a swing-away rack
- Provides easy tailgate access - even with a rack fully loaded with bikes
- Easily swings open 90 degrees and locks in place with the simple to use release lever
- Safety latch secures the rack closed while you're on the road
- Secures to any 2" hitch receiver using a threaded pin
- Included SKS (Same Key System) lock keeps the rack secure
- 250 lb maximum load capacity (rack plus gear)
Product Specs:
- Weight: 35.46 lbs
- Dimensions: L 20.00" x W 30.00" x H 8.00"
Installation Details:
- Some Assembly Required
- 10 Minute Install
- 2" Hitch Receiver Required
Compatible with the following:
- Dr.Tray- 2" only (without the EZ+1 attached)
- SingleSpeed
- HangOver 4 - 4 Bike only
- TwoTimer
- HoldUp EVO
- HoldUp EVO +2
- HoldUp
- HoldUp +2
- FourTimer
- LongHaul (Vans and Passenger Vehicles Only)
- RoadTrip (Vans and Passenger Vehicles Only)
$50.00 - $72.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
$39.00
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber.
- Secures the bow and stern of any boat
- Best in class corrosion resistance
- Clear plastic tubes protect your vehicle from damage
$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$89.00
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
$49.00
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.
$35.00
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop.
Product Details
- Durable stainless steel axle and body
- Easy to adjust end nut and cam lever
- Lockable with a SKS lock, sold separately
- Includes 9mm x 135mm threaded adapters for Yakima ForkChop
- Includes 135mm sleeve for use on Yakima HighSpeed
Product Specs
- Weight: 1.15 lbs
- Dimensions: L 9.50" x W 3.50" x H 1.25"
$12.00
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks.
- Includes two straps
- Weight: 0.44 lbs.
- Dimensions: L 15.50 in x W 1.00 in x H 18 in
$49.00 - $59.00
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack.
- Axle not included. Works with your bike's thru-axle
- Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc.
- Built-in safety tabs
- Durable black powder-coat finish
Product Specs:
- Weight: 0.32 – 0.38 lbs.
- Minimum Crossbar Spread 16in
- Maximum Crossbar Spread 42in
- Limited Lifetime Warranty
$119.00
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
$159.00
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
$239.00
Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of.
- Fits Yakima round, square, factory or aerodynamic crossbars
- Zero contact with frame; carbon fiber and custom paint jobs are protected
- Accommodates disc brakes, thru axles, and full suspension bikes
- Holds bike upright while you secure the bike to the mount
- Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike)
- No tools or assembly required
- Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7"
- SKS Locks sold separately
- 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread
- Accommodates bike wheelbases up to 48"
Product Specs:
- Weight: 13.00 lbs.
- Dimensions: L 56.00 in x W 7.00 in x H 7.50 in
- Minimum Crossbar Spread 16.00in
- Maximum Crossbar Spread 42.00in
- Limited Lifetime Warranty
$649.00
Now the family bikes can ride in style. The FullSwing has all the bells and whistles, from new ZipStrips to fully padded arms. It also swings away with one touch, for easy access to your car whenever you need. Holds up to four bikes.
- Swings away from car with bikes loaded to provide easy access to rear of vehicle
- Quick and easy assembly
- Tool-free installation with locking SpeedKnob
- AutoPin automatically positions and secures rack to the hitch and receiver
- Zero-hassle ZipStrips quickly secure bike to rack
- Fully padded arms for the ultimate in bike protection
- Arms fold down when not in use
- SKS Locks included; locks racks and bikes
- Carries up to 4 bikes
- 4 bikes. Total weight, 150 lbs. Maximum bike weight 40 lbs each.
- Available: TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes.
Product Specs:
- Weight: 56.00 lbs.
- Dimensions: L 43.50 in x W 26.00 in x H 17.50 in
- Limited Lifetime Warranty
$179.00 - $199.00
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top.
- G-Hook tension lock system is easy on carbon bike frames and painted surfaces
- Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes
- Rugged, vinyl coated nylon outer material resists abrasion and weather damage
- Extra soft felt backing protects your trucks paint job
- Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck
- Reinforced webbing ends for easy installation under the tailgate
- Integrated strap management system keeps the pad tight and secure on the way to the trailhead
- HindSight tuck-away cover opens up the view for your back-up camera
- Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider
- Printed graphics and silver reflective Yakima logo
PRODUCT SPECS
- Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in
- Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in
$319.00
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way.
Product Details:
- Strong, lightweight aluminum construction handles heavy loads great for rooftop tents
- Integrated tie-down points on endcaps make it easy to secure gear
- T-slots top and bottom to easily add Yakima and compatible gear mounts
- Includes rubber infill for top T-slot for load protection and wind noise reduction
- Built to last and look good doing it with a durable black powder-coat finish
- Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541)
- Available in variety of lengths 55"/60"/68"/78" to create custom set-ups
Dimensions:
- Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in
- Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in
- Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in
- X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
$29.00
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
$629.00
Fast, secure, and easy to use, the HoldUp EVO is built to handle new bike standards, like fat tires and boost hubs, but it easily carries the classics too. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. Tilt the rack with bikes loaded for quick rear-of-vehicle access using the new easy-to-reach tilt lever and KickStart foot pedal. The super-simple locking SpeedKnob makes install a tool-free breeze and included SKS bike locks keep your mind at ease.
- Hitch-mounted tray rack that loads quickly and carries two bikes without frame contact
- Easy-access tilt mechanism and KickStart foot pedal make raising and lowering the rack a breeze, even with bikes loaded
- Tool-free locking SpeedKnob makes installation and removal fast, easy and secure
- StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames
- Easily adjust trays to reduce bike-to-bike interference
- Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs.
- Accommodates disc brakes, through axles, boost hubs, and full suspension bikes
- Fits 20" to 29" wheel sizes and tires up to 4.8" wide
- Accommodates bike wheelbases up to 48"
- Integrated SKS (Same Key System) locks included for added bike security
- Carry four bikes – just add the HoldUp EVO +2
$429.00
Great for families, double dates, or bringing your entire bike quiver, the HoldUp EVO +2 turns the 2" HoldUp EVO into a four-bike hauler. It's versatile enough to handle most bikes, from BMX to fat tire bikes. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. The whole unit can still tilt down and out of the way with bikes loaded, for easy rear-of-vehicle access, and the empty trays fold up and out of the way when not in use. Included SKS locks for each bike give you peace of mind.
- Attaches to the 2" HoldUp EVO to carry two additional bikes
- StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames
- Trays easily adjust to reduce bike-to-bike interference
- Tilts down with bikes loaded for rear-of-vehicle access
- Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs.
- Accommodates disc brakes, through axles, boost hubs, and full suspension bikes
- Fits 20" to 29" wheel sizes and tires up to 4.8" wide
- ?Accommodates bike wheelbases up to 48"
- Integrated SKS (Same Key System) locks included for added bike security
- Compatible only with 2" version of HoldUp EVO & HoldUp
Product Specs:
- Weight: 36.44 lbs.
- Dimensions: L 27.00 in x W 42.00 in x H 8.00 in
- Limited Lifetime Warranty
$549.00
Now you can haul 2 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters thanks to Yakima's HoldUp Hitch Rack. This sturdy rack sports heavy cast wheel trays and their adjustable StrongArm retainers that hold the bikes by the wheels for superior stability and super-quick loading. Side-to-side adjustability ensures a perfect fit and minimizes bike-to-bike interference. A user-friendly trigger folds the tray down for easy access and the entire mast folds up when not in use. Plus, the HoldUp also includes Yakima's LockDown cable system, which secures your bicycles and rack to your vehicle. There's even an integrated bottle opener.
$199.00
Simple, sturdy, and reliable – the JayHook is a fresh take on a Yakima classic. Designed to carry all types of kayaks, these side-loading J cradles are tough enough for years of use, secure enough for winding river roads, and padded enough to coddle your kayak. The tool-free universal attachment works with most roof racks. Bow/Stern Tie downs and Heavy Duty Straps are included, so you get everything you need to carry your boat.
- Carries any type of kayak while taking minimal space on your roof rack
- J-shaped cradle is secure, stable, and easy to load
- Durable padded contact points provide protection and grip while traveling
- Universal mounting hardware fits most roof racks
- Easy tool-free installation lets you quickly mount, load and go
- Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
$229.00
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24inches or more
$219.00
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
$249.00
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards.
Product Details:
- Loads can be secured, braced against, and/or tied down to perimeter rails.
- Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories.
- Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails).
- Heavy-duty hardware features a durable black-zinc coating.
- Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards.
- Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase).
- Easily installs in minutes.
- Weight: 17.80 lbs
- Dimensions: L 44.00in x W 1.50in x H 3.50in
$50.00
If you've got a truck bed or pretty much anywhere you can insert a couple bolts, you've got yourself a place to install this handy fork-style bike mount. This one comes with a locking single-sided adjustment skewer so you can secure your bike easily. Includes SKS lock core and two SKS keys.
- A "bolt anywhere" fork-style bike mount
- Fits bikes with 9mm x 100mm front hubs
- Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included
- Corrosion-resistant anodized aluminum construction
Product Specs:
- Weight: 1.45 lbs.
- Limited Lifetime Warranty
$49.00
Use Yakima's MegaWarrior Stretch Net to secure and control loads on the MegaWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
$830.00
For weekend adventures and hardworking weekdays, the Overhaul HD adjustable truck rack offers best-in-class payload and unmatched versatility. Leveraging our new HD Bars for a 500-lb. on-road carrying capacity, and paired with Yakima’s 300-lb. Off-Road Rating, the OverHaul HD truck rack is the ideal foundation for heavy loads. The crossbar height can be adjusted to suit your needs: way up, for long loads to go over the cab—or down low, to get the rack out of the wind. The uprights are easy to take on and off in minutes, so the truck’s only racked-up when needed. The OverHaul HD truck rack uses any of our HD Crossbar sizes (HD Crossbars sold separately), and accepts our SideBars for attaching off-road and utility accessories. Multiple tie-down points and the ability to fit most truck beds—including select tonneau covers—make this an ultra-functional rack that works and plays as hard as you do.
PRODUCT DETAILS
- Adjustable height from 19–30" to create custom set-ups for maximum utility and versatility
- Maximum on-road rating of 500 lbs.
- Maximum off-road rating of 300 lbs.
- Easy on-off placement in minutes with our patent-pending QuickChange rack attachment
- Designed and tested for all common truck beds using our BedGrip clamp design,
- Additional required kits needed for tracked beds (Track Kit 1) and select tonneau covers (Tonneau Kit 1)
- Built to last with engineered aluminum construction and a durable powder-coat finish
- Compatible with all Yakima mounts to carry kayaks, surfboards, bikes, rooftop tents, lumber and more
- Integrated tie-down points help easily secure any load
- T-slot attachments make adding gear mounts and accessories fast—and simple
- Integrated SKS (Same Key System) locks to secure your rack system to the truck bed
- Works seamlessly with the new Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately)
- Built-in bottle opener—cheers!
- Suggested accessories: SideBar, Load Stop, Eye Bolt, Ladder Roller, Wear Strips, HD Hook Strap, Rotopax Mounting Kit, Recovery Track Mount
PRODUCT SPECS
- Weight: 50.54 lbs
- Dimensions: L 16.75in x W 5.50in x H 23.50in
- Limited Lifetime Warranty
Page 1 of 6
Next page